I can’t be happier with the fit of the ATN Jib Sleeve! Looks good. Fits like a glove and now whatever sail is on the fuller will be protected from the sun, wind and other elements.
I bought the sail cover from defender.com. There were cheaper ones out there but this one looked great and I liked the features. It’s very well thought out and can be tightened around the sail once it’s put up so it doesn’t flap around and rip itself to shreds in a good wind storm. The notes for ordering on the website said to order the jib sleeve in the same size as the luff of the longest sail. That’s 37′ on Cuajota. So that’s what I ordered. When it arrived I put it over the jib I had converted to roller furling use from hanks. I didn’t realize this sail is 38′ 3″ at the luff. So when I did a full hoist on the jib sleeve it was a whopping 28″ too short! So I contacted Defender and they informed me there were no returns on a custom order but they contacted ATN directly and setup a scenario for me to ship it back to them and they lengthened it 28″ for me. Awesome customer service and it was about 2 week turnaround. I can’t tell anything was done to it. The fit is spot on! My only complaint in this whole process is that this sleeve is 39′ 4″. There is no way I would have gotten to that size without ordering, hoisting it and then measuring the difference from the bottom of the sleeve to about an inch above the furler drum. Also ordering the size of my jib luff gave me a sleeve that MAY have covered just the sail, now I have a sleeve that covered the top of the furler mount as well as going all the day to the top of the drum. A much better solution. Now on to getting that jib cut properly. It seems it’s about 8 – 12 inches too long. The full travel of the furler is 37′ 6″. Thanks to North Sails for lending me the tape measure to get that accurate measurement. Now I know what the luff needs to be. So the sail will go back to North Sails for an adjustment. I’ll also keep an eye out for some big sails to get cut down. Maybe some Carbon or Kevlar!
Ok so I got the custom jib sock from ATN, Inc. I was so excited. This meant that I wouldn’t have to drop the headsail after the very sail. Making it so much more convenient to sail. I put the sail up then put the jib sock over it and realized to my horror it was too short. Not by a few inches but by a whopping 28 inches!!!!
So a few emails to Defender.com and they put me in touch directly with the manufacturer. He says with confidence that he can fix it. So I packed it up and shipped it to Florida to ATN, inc for them to add 28 inches to the jib sock. My initial impressions of it very positive. Easy to put on. Easy to take off. Well made and it’s great looking. Get the length correct and it’s a GREAT piece of gear. This allows me to use headsails without UV covers and keep them on the furler. I have had two headsails deteriorate due to UV damage. This will protect the sails from UV when not in use. This will also allow me to add sails to to boat and not have to have UV covers on them. I plan on getting a 155 light air sail as well as a good 135-140 racing sail maybe a Mylar or carbon material. I can do used and have the local lift cut them to fit. Stay tuned for more updates!
Spoke to Etienne at ATN, and he received the Jib Sleep, added 28″ to it and shipped it out the next day. I should have it back by mid week next week! Great service!!
As part of the new “Get things done” attitude I have, the upgrades and maintenance continues. My mast climber Matt went up the mast and installed the Raymarine/Tack-Tick wireless anemometer. The final step now is to mount the 2 displays. Excited to now have working electronics on the boat!
New additions over the winter:
1. New Winch Coveres
The old ones were falling apart, literally. So I got a set of Blue Performance Winch Covers in Blue and Grey
2. Cockpit Cover
For when relaxing while docked…now we have a nice Sun Cover for the cockpit.
3. Jib Sock
ATN makes a pretty nifty (and pricey) jib sock. This allows me to leave the unprotected jibs on the furler and cover them. Now I don’t have to take them down in between sails and I don’t have to worry about getting UV covers on my jibs.
Here are the things that need to be done.
1. Mount Anemometer on the top of mast for the Tack Tick Wireless Electronics
2. Mount Tack Tick Displays
3. Fix fuseholder for bilge pump
4. Check charging wire for 2nd battery
5. ATN Tacker for Spinnaker
6. Refinish Cockpit wood on the boat
7. New Lifelines
8. Paint/refinish boom
9. Boom kicker boom lift
10. NMEA Wireless Router/wi-fi system
For me, my goals are:
1. Catalina Trip
2. Learn To Use Spinnaker
3. Around Catalina Island
4. San Diego Trip/Mexico
So Its January and I need to get started on these things!!!
Here is something I’m almost embarrassed to admit. Since we have had the boat there has been no hailing port in it. It was Point Loma when we bought the boat and we decided to have that removed when we had the bottom paint done and the hull waxed the first week of ownership. We were gonna have someone come and do it but never got around to it. I was looking online and needed to also replace the registration numbers and found a place that does this kinda thing CHEAP. The site is www.boatletteringtoyou.com and they have a pretty nice site that lets you pick the size and fonts and spacing. I measured the size of the Point Loma lettering from before, you can kinda see it still and got the new hailing port the same size but a different font. I think it was about $12.
This was a breeze. I took my time so it would be centered and straight. I got some masking tape and taped a straight line across the transom. I measured from the tape to the top of the transom on each end of the tape and the middle. All exactly the same. I then grabbed the vinyl graphics and it comes with a 2 step application. Step one is line it up and then tape it with masking tape on the top to hold it in place. Then lift the vinyl upfront the bottom while keeping the tape at the top attached and peel off the paper backing exposing the letters adhesive. Then careful lay it flat down and using the plastic squeegee thing it comes with the smooth it out. Once that’s down i went over the letters with the plastic applicator for about 5 minutes. Then I peeled the top layer off which left just the letters on the boat.
I’m ashamed it only took 6 years to get around to a $12 solution. I’m pretty happy with the way it came out. Now if I could only change the way the backstay mounts to the transom and refresh the Cuajota lettering without the silver bar across the name. I’ll put that on the list of things to do. A lot of other things are ahead of it though.
Im excited about this one! I have never had working instruments on the boat and it’s been on my list of things to do and now it’s a reality. I have installed the Raymarine Wireless super sailing pack. This is a complete package that comes with 2 displays, 1 multi data display and one wind display, a Wind Mast instrument, a depth transducer, a speed transducer, a wireless hull transducer and a NMEA data interface. The cool thing is that this is a wireless and solar/battery powered system. The only wiring that needs to be done is to run the wires from the transducers to the Hull transducer. The displays and wind instrument are wireless and solar/battery powered. No wires to run! Just turn on one of the displays and the system powers on and shows whatever data is in the system! Now have accurate speed, wind, and depth data! The plan is to add an NMEA to WiFi interface and wirelessly interface with iPad and iPhone into the network for additional data displays and also remote control of devices, eventually chart plotting and autopilot. Now that The system is working, I need to get the wind transducer to the top of the mast then decide where to put the displays. Good problems to have!